Status bar

Common status bar items

Items that usually appear on the status bar are:

Item	Name	Description
	Menu button	Tap to view the menu.
	Application icon	Shows the current Origin app. If you have only one app installed, the status bar always shows the General Survey icon. If you have the Origin Roads app installed, then to swap between apps, tap the icon and then select the app to switch to. In portrait mode, the app icon does not appear on the status bar. To change to a different tap, tap and select the name of the current app (for example, General Survey) and then in the Choose application screen, tap the name of the app to switch to.
	Date and time	Shows the current date and time.
	Status line	The status line displays a message when an event or action occurs. Tap the status line to switch from one instrument to another during an integrated survey. The status line appears at the far right of the status bar. In portrait mode it appears below the status bar.

Battery status

The Battery status area on the status bar shows the status of the battery in the controller and devices connected to the controller. If the controller has more than one battery, the power level of each battery is shown.

To view the Battery status screen, tap the battery status area of the status bar.

Conventional survey status

During a conventional survey, values for the current horizontal angle or vertical angle and distance are shown in the status line.

Instrument status

To view the:

Instrument functions screen, tap the Instrument icon in the status bar.
Instrument settings screen, tap and hold the Instrument icon in the status bar.

The Instrument icon indicates the type of connected instrument. Symbols are added to the Instrument icon to indicate status.

Icon	Indicates
	The software is connected to a Spectra Geospatial FOCUS 50 total station.
	The software is connected to a Spectra Geospatial FOCUS 30 or 35 total station.
	The instrument is locked onto the target (prism).
	The instrument is locked and measuring to the target (prism).
	The instrument is in Fast Standard (FSTD) mode. It averages the angles while a fast standard measurement is taken.
	The instrument is in Standard (STD) mode. It averages the angles while a standard distance measurement is taken.
	The instrument is in Tracking (TRK) mode. It constantly measures distances and updates in the status line.
	The instrument is locked to the target (prism) and receiving an EDM signal back from the prism.
	The laser pointer is on (DR mode only).
	The high power laser pointer is on.
	Radio signals from the robotic instrument are no longer being received.
	The compensator is disabled.
	Auto‑connect is disabled. Tap the icon once to restart auto‑connect. Tap the icon again to configure Auto‑connect settings.

Target status

To change the target or target settings, tap the Target status icon in the status bar. See Target height.

Icon	Indicates
	The prism is locked. "1" indicates that target 1 is in use. The prism constant (in millimeters) and target height are shown to the right of the icon. When measuring a point with a dual-prism offset, two prism constants are shown.
	The instrument is in Direct Reflex mode.
	The rotating target icon with a pulsing red halo indicates that the instrument has Autolock enabled but is not currently locked onto a target.
	GPS Search is enabled.

GNSS survey status

During a GNSS survey, precision information for the current position is shown in the status line.

GNSS receiver

To view the:

GNSS functions screen, tap the GNSS receiver icon in the status bar.
Receiver settings screen, tap and hold the GNSS receiver icon in the status bar.

The GNSS receiver icon indicates the type of connected GNSS receiver:

Icon	Indicates
	Spectra Geospatial SP100 receiver, where IMU tilt compensation is enabled and the IMU is aligned. Measurements are corrected for receiver tilt. Precision values for the current pole tip position are displayed.
	Spectra Geospatial SP100 receiver, where IMU tilt compensation is enabled but the IMU is not aligned. Measurements are not corrected for receiver tilt. No precision values are displayed.
	Spectra Geospatial SP100 receiver, where IMU tilt compensation is not enabled. The receiver is operating in GNSS-only mode. Precision values for the APC are displayed.
	Spectra Geospatial SP90m receiver
	Spectra Geospatial SP85 receiver
	Spectra Geospatial SP80 receiver
	Spectra Geospatial SP60 receiver
	Spectra Geospatial SP30 handheld GNSS receiver
	Auto‑connect is disabled. Tap the icon once to restart auto‑connect. Tap the icon again to configure Auto‑connect settings.

Real-time correction information

To view more detailed status information, tap the real-time correction information area of the status bar.

Icon	What it shows
	Radio signals are being received.
	Radio signals are no longer being received.
	Cellular modem signals are being received.
	Cellular modem has hung up, or has stopped receiving corrections.
	SBAS signals are being received.
	RTX satellite signals are being received and an RTX position is being generated.
	Data is being received from the RTX satellite but an RTX position cannot be generated yet.
	An RTX survey is running but data is not being received from the RTX satellite.
	A point is being measured.
	Continuous points are being measured.
	A GNSS RTK survey is running and base data from a GNSS internet source is being streamed to the rover.
	A GNSS RTK survey is running and base data streaming from a GNSS internet source is paused. Base data streaming automatically restarts when required.
	A GNSS RTK survey is running and base data from a GNSS internet source is being received but the solution from the receiver is not yet using that base data.
	A GNSS RTK survey is running and base data streaming from a GNSS internet source is stopped. The base station connection to the GNSS internet source is maintained, but the real‑time base data will not be streamed to the rover.
	A GNSS RTK survey is running but base data from a GNSS internet source cannot be received.